increases with

The potential energy outside the metal decreases with distance from the surface.

Drill speeds decrease as drill diameters increase.

The sweep component beats with the second, third, and fourth harmonic as the sweep frequency increases.

As the length of the chain between... increases, so does the tendency of...

The amount of carbon formed tended to increase with increase in reaction temperature.

Corrosion rate increases with increasing (or increased) temperature.

The live load decreases with an increase in the floor area.

This difference increases with temperature (or with increasing temperature, or as the temperature increases).

The amount of carbon formed tended to increase with increase in (or with increasing) reaction temperature.

Corrosion rate increases with increased temperature.

The equilibrium constant will fall with a rise in temperature.

The strength of the metal falls off quickly as temperatures go higher (or rise).

The helium-neon and argon-ion lasers provided a continuous output of laser light, as opposed to the pulsed output of the metal vapours.

The metal-oxide-semiconductors technology produces transistors of the unipolar type in contradistinction (or in contrast) to the earlier junction transistors, which are bipolar.

Contrary to upsetting, extrusion reduces the diameter of...

Contrary to popular belief, not all mixtures of hydrogen and oxygen are dangerous.

In contrast to most metals, the conductivity of semiconductors increases with temperature.

The temperature is increased, causing the gas to expand.

Several types of electronic multipliers develop an output of the form υ₁υ₂/υ₃, with the result that (or as a result of which) either multiplication or division is impossible.

атмосферная инверсия
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

EN

atmospheric inversion
A temperature inversion in the atmosphere in which the temperature, instead of falling, increases with height above the ground. With the colder and heavier air below, there is no tendency to form upward currents and turbulence is suppressed. Inversions are often formed in the late afternoon when the radiation emitted from the ground exceeds that received from the sinking sun. Inversions are also caused by katabatic winds, that is cold winds flowing down the hillside into a valley, and by anticyclones. In inversion layers, both vertical and horizontal diffusion is inhibited and pollutants become trapped, sometimes for long periods. Low-level discharges of pollutants are more readily trapped by inversions than high level dischargers, hence the case for high stacks. Furthermore, high level discharges into an inversion tend to remain at a high level because of the absence of vertical mixing. (Source: GILP96)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

Тематики

• охрана окружающей среды

EN

• atmospheric inversion

DE

• atmosphärische Inversion

FR

• inversion thermique

атмосферная инверсия
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

EN

atmospheric inversion
A temperature inversion in the atmosphere in which the temperature, instead of falling, increases with height above the ground. With the colder and heavier air below, there is no tendency to form upward currents and turbulence is suppressed. Inversions are often formed in the late afternoon when the radiation emitted from the ground exceeds that received from the sinking sun. Inversions are also caused by katabatic winds, that is cold winds flowing down the hillside into a valley, and by anticyclones. In inversion layers, both vertical and horizontal diffusion is inhibited and pollutants become trapped, sometimes for long periods. Low-level discharges of pollutants are more readily trapped by inversions than high level dischargers, hence the case for high stacks. Furthermore, high level discharges into an inversion tend to remain at a high level because of the absence of vertical mixing. (Source: GILP96)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

Тематики

• охрана окружающей среды

EN

• atmospheric inversion

DE

• atmosphärische Inversion

FR

• inversion thermique

атмосферная инверсия
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

EN

atmospheric inversion
A temperature inversion in the atmosphere in which the temperature, instead of falling, increases with height above the ground. With the colder and heavier air below, there is no tendency to form upward currents and turbulence is suppressed. Inversions are often formed in the late afternoon when the radiation emitted from the ground exceeds that received from the sinking sun. Inversions are also caused by katabatic winds, that is cold winds flowing down the hillside into a valley, and by anticyclones. In inversion layers, both vertical and horizontal diffusion is inhibited and pollutants become trapped, sometimes for long periods. Low-level discharges of pollutants are more readily trapped by inversions than high level dischargers, hence the case for high stacks. Furthermore, high level discharges into an inversion tend to remain at a high level because of the absence of vertical mixing. (Source: GILP96)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

Тематики

• охрана окружающей среды

EN

• atmospheric inversion

DE

• atmosphärische Inversion

FR

• inversion thermique

These forces level off at a high temperature.

The current increases with applied potential, until it levels off at a limiting value.

The helium-neon and argon-ion lasers provided a continuous output of laser light, as opposed to the pulsed output of the metal vapours.

The metal-oxide-semiconductors technology produces transistors of the unipolar type in contradistinction (or in contrast) to the earlier junction transistors, which are bipolar.

Contrary to upsetting, extrusion reduces the diameter of...

Contrary to popular belief, not all mixtures of hydrogen and oxygen are dangerous.

In contrast to most metals, the conductivity of semiconductors increases with temperature.

These forces level off at a high temperature.

The current increases with applied potential, until it levels off at a limiting value.

HTU_0G increases with gas-flow rate, but passes (or goes) ( through) a maximum ( oppos. minimum) in the vicinity of the loading point.

HTU_0G increases with gas-flow rate, but passes (or goes) ( through) a maximum ( oppos. minimum) in the vicinity of the loading point.

The thickness of the loess deposits decreases away from the rivers (or as the distance from the rivers increases).

With distance from the centre the concentration decreased.

The magnetic energy increases with distance (or away) from the centre.

As we recede from the magnetic poles...

For a detailed discussion of this subject see Chapter VI.

See Section 3.9 for a more detailed discussion of...

Refer to Fig. 728.

This increases with the concentration, figure 8.12.

выдерживать давление — withstand pressure

высокого давления — high-pressure

для работы при высоком давлении — high-pressure

испытывать под давлением — test under pressure

повышать давление — raise pressure, build up pressure

под давлением 10 атм — under pressure of 10 atm

сбрасывать давление — depressure, depressurize, release pressure

создавать давление — pressurize, produce a pressure

создание давления — pressurization

давление увеличивается с глубиной — pressure increases with depth